Motion sensor : pongo tech

You will never know , how to use sensors

Lets go through some intro and research for the details

You can install remote motion detectors in your home to prevent them from being turned off or off if you don’t want to turn them on. Outdoor motion detector lights can be wall-mounted, built into a deck or installed as light bulbs in existing luminaires. If you are just starting to build your smart home and already have dozens of connected devices, Our sensors are capable intelligent motion sensor is a worthwhile addition to your setup.

Motion detector porch lamps are a wonderful way to welcome family and friends into your home. You can also improve the comfort, safety and security of your property by installing motion detector lamp fixtures on your property, especially in dimly lit areas like large backyards and garages. Motion sensor lights save electricity and can help you save on your electricity bill.

Motion sensors and light switches save energy by turning off the light in a room when activity is detected. Motion detectors are light switches that turn on automatically when they sense that the room has been turned off after some inactivity. They can be installed by individuals or in homes to reduce the possibility that the light will remain on and electricity will be wasted. Among the best light switches are intelligent motion detectors that send notifications to a smart home hub when the light is turned off.

Other forms of lighting control include occupancy sensors, daylight sensors, time switches and a wide variety of manual and automatic dimming devices for central control. Both external motion detectors and internal occupancy sensors can be used to turn the light on and off when people (including intruders) are present.

Standard switches and relays can be used to switch a group of lights on or off. Energy-efficient timers and LED-saving light switches can be programmed with intelligent hubs and home energy management systems (constellations) that can be connected to conserve energy and improve safety in the home. When installed wired, these switches can also be controlled with a smartphone app or a smart hub.

For example, a CFL bulb (equivalent to 60 watts) consumes 13 watts, while an LED bulb (which is more expensive in advance) consumes 5 watts. Not only are the energy costs lower, but the penalty for using space is not serious if you forget to turn off the light switch. A small amount of energy is consumed to turn the light on and off, but it is not as big as the amount of energy consumed when the light remains on.

Generally it does not matter whether the motion detector is switched on or off, incandescent bulbs or LED lamps. When a motion-activated light bulb is switched on, motion in the dark can be detected for a specified period of time. When the light is switched off, the movement decreases and there is no need to operate the switch.

Motion-sensing light switches offer the greatest energy savings when used in places where the light is accidentally switched on or off. I refer to switching off the light in a room when it detects movement, and switching off the light after a certain time when no movement is detected. Motion sensors reduce the power consumption when something happens to the light that remains on, thereby reducing the cost of electricity in the home.

This type of light bulb uses less energy than light bulbs and is one of them. However, it is still an energy guzzler, so it is best to use it only in the kitchen.

Also check out other blog for motion tube lights

Intro to Pongo technologies Motion tube lights

At Clarkson University, for example, it was estimated that switching to motion sensors in dormitories could reduce energy consumption by 22 per cent, equivalent to a reduction in coal consumption by £2,300. The BTO (US Department of Energy Building Technologies Office) sponsored a study to identify potential national savings in the commercial construction sector through the widespread use of best practices to control, eliminate system component faults and deploy better sensors. The 2012 Commercial Building Energy Consumption Survey (CBECS) of the Energy Information Administrations (energy information administrations) was used to put the results of individual measures and packages of measures on a national scale by weight, design, climate and location.

Even small steps, such as changing the motion sensor on a light switch, can lead to ongoing efforts to reduce carbon dioxide emissions by changing individual households. With a 60 watt light bulb that we leave on all day, the energy consumption alone can make an automatic light switch worthwhile in some cases.

About the Author

Pongo Home


Leave a Reply

Your email address will not be published. Required fields are marked *